Hi guys
I’m going to attend Stevens Institute of Tech for a Masters in Construction Mgmt this summer and I really desire real life experience in the field. I’m absolutely passionate about construction and I’m certain this is where I will focus my energy and training at.
All my professional experience thus far is in accounting, albeit with experience in real estate and development/construction industries.
Can someone advise me on how can I break into the project management, field ops side and what size of GC firms should I target? I really like mega projects but fear I can’t get an internship or interview chance at the big construction firms.
Would cold emails to recruiters work or target cold email alumni? Suppose I take on a project coordinator role, can that lead to APM or A.Super role?
Thanks！
[link] [comments]
from Construction http://bit.ly/2PJxW3s
via Handy Rep Ai
The MERITs brand new foam wiper ball (FWB) is made of natural rubber and can be used in a temperature range of -40°F (-40°C) to 302°F (150°C).
ReplyDeleteWe are only and unique genuine and original procurer of certified 11 ” foam rubber wiper balls to wipe 8 5/8″ casing in Canada, Thailand, China and other offshore oilfields.
The foam ball has a parting stretch of 380 to 440%, which means it can pass through small restrictions without being damaged.
Standard Specifications:
Material: Polyisoprene (Rubber) Natural
Longevity: Extended-Life Rubber Formula
Parting Strength: 380% to 440%
Swelling: 5% in water
Deformation Pressure: 32 psi – 65 psi (22 N/cm2-45 N/cm2)
Temperature: -40°F to 302°F (-40°C to 150°C )
Breaking Elongation: 440%
Abrasive Resistance: Good
Elastic to: -40°F (-40°C)
Material: Natural Rubber Vulcanised at 311°F (155°C)
Flammability: High flammability, burns with soot
Stability: Not available with acids, alkalis, oils, fats and solvents
Thousands of FWB have been utilised to wiper tubulars and drill tubing, as well as isolate fluids during cementing operations, with great success.
The wiper balls can be loaded into drill pipe or tubing connections. It easily passes through internal upset restrictions such as mechanical setting tools, diverters, and liner running tools and multiple balls can be pumped if necessary.
MERIT’s wiper foam ball has been used with all types of drilling and displacement fluids.
By the way our wiper foam balls the best match one and only output with oil & gas industry specific cementing wiper foam balls launcher. There is no an other profitable alternative to our products offshore and onshore.
WP10005: general size reference 5.00 in. Actual size 4.92 in. Thus its typical wiping range 4.00 to 1.75 in. This is minimum restriction of it is 0.750 in.
WP10006: general size reference 6.00 in. Actual size 5.91 in. Thus its typical wiping range 4.75 to 2.00 in. In addition minimum restriction of it is 0.875 in.
WP10007: general size reference 7.00 in. Actual size 6.89 in. Thus its typical wiping range 5.50 to 2.38 in. Plus its minimum restriction of it is 1.000 in.
WP10008: general size reference 8.00 in. Actual size 7.87 in. Thus its typical wiping range 7.00 to 3.00 in. Additionally its minimum restriction of it is 1.375 in.
meritautomotive@gmail.com